Transformers can have taps on the primary side and secondary side. The change of taps can be performed manually or using a tap switch. L/C Magnetics is a tap switch transformer manufacturer. We can integrate a Tap Switch with an appropriate Single Phase, Three Phase or Scott T transformer.
It is recommended that an output volt meter is installed with the tap switch to monitor output voltage.
An example of a single phase custom tap switch transformer, part number 18897TS is shown below:
Specifications:
- Tap Switch Transformer: 12 KVA, 1 PH, 60 Hz, P/N 18897TS
- Primary: 480 VAC, 25 Amps, (H1, H2)
- Secondary 1: 120 VAC, 100 Amps, Position 1
- Secondary 2: 130 VAC, 92 Amps, Position 2
- Secondary 3: 140 VAC, 86 Amps, Position 3
- Secondary 4: 150 VAC, 80 Amps, Position 4
- Indoor enclosure: 24”H x 18”W x 16”D
- Tap Switch with handle and nameplate are installed on the enclosure.
L/C Magnetics is a Tap Switch Transformer manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.
No comments:
Post a Comment