Twelve gapped inductor load banks are shown in Table A. These load banks can be programmed by the customer for connections in parallel to offer a programmable load from 50 KVA to 600 KVA.
Table A
The schematic of the gapped inductor load bank is shown below:
Specifications:
- Gapped Inductor Load Bank, 3 PH, 50 Hz, 50 KVA
- L (1, N) = 7.35 mH ± 25%, 100 Amps
- L (2, N) = 7.35 mH ± 25%, 100 Amps
- L (3, N) = 7.35 mH ± 25%, 100 Amps
- Copper winding construction
- Copper bus bars are 1" x ¼” with one hole
- Open core & coil: 17"H x 20"W x 14"D approximately
- Calculated temperature rise: 42°C
- 12 Inductors will be housed inside an indoor enclosure, 50"H x 65"W x 36"D
The estimated dimensions of the inductor load bank is shown below:
Twelve inductor load bank is housed inside an indoor enclosure (50"H x 46"W x 36"D) as shown below:
The photo of the enclosure is shown below:
No comments:
Post a Comment