Multi Tap Gapped Inductor, 170/340 uH, 450 A RMS, P/N 19014L

Product Overview:

L/C Magnetics is a Multi Tap Gapped Inductor Manufacturer. We build Inrush Current Applications inductor, Current Limiting Applications inductor and AC and DC Filter Applications inductor. All our Gapped Inductors are custom built to order. These inductors are not air gapped inductors. The gap is filled with a suitable insulation material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a Custom High Current Gapped Inductor, part number 19014L is shown below:

Specifications:

• Multi Tap Gapped Inductor, P/N 19014L 
• L (1, 2) = 170 uH ± 15%, 450 A RMS 
• L (1, 3) = 340 uH ± 15%, 450 A RMS 
• Three units shall be made. Tolerance between units to be ± 5% max from each other. 
• Fundamental Frequency; 100 Hz 
• Ripple at 10 KHz: 1% (4.5 Amps p-p) 
• Calculated core temperature rise: 19°C 
• Calculated copper temperature rise: 22°C 
• Overall temperature rise: 37°C 
• Copper bus bars are 2” x 1/4” with one hole 
• Open core and coil. Estimated at 12.0”H x 12.0”W x 14”D 
• Hi-pot for one minute at 2500 VAC from core to coil 
• Estimated weight: 250 lbs

L/C Magnetics is a Multi Tap Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 22 mH, 80 A RMS, P/N 18886L

Product Overview:

L/C Magnetics is a Custom Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a Gapped Inductor, part number 18886L is shown below:

Single Phase Inductor

Specifications:

• Gapped Inductor, P/N 18886L 
• L (1, 2) = 22 mH ± 5%, 80 A RMS, 60 Hz 
• Applied voltage: 660 VAC max 
• Copper winding construction 
• Open core and coil: 11”H x 11”W x 12”D 
• Copper bus bar: 1/8” x 5/8” with one hole 
• Calculated temperature rise: 26ºC 
• 10% oversize so that the unit does not go into saturation. 
• Weight: 210 lbs approximately

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 150 mH, 1 ADC, P/N 19013L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a custom gapped inductor, part number 19013L is shown below:

150 mH Gapped Inductor

Specifications:

• Gapped Inductor, P/N 19013L 
• L (1, 2) = 150 mH ± 15%, 1 ADC 
• Terminals 1 and 2 are solder lugs 
• Temperature rise: 16° C 
• RDC = 4 ohms 
• Open core and coil dimensions: 3”H x 3”W x 2.75”D 
• Mounting dimensions: 2 1/2”W x 2 1/8”D, 4 slots 
• Weight: 2.5 lbs approx.

L/C Magnetics is a Gap Inductor manufacturer. For your specific requirements please call us toll free at (800) 595-7096 or send us an e-mail at info@lcmagnetics.com.

Gapped Inductor, 120 mH, 4 ADC, P/N 19012L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a Gapped Inductor, part number 19012L is shown below:

Specifications:

• Gapped inductor, P/N 19012L
• L (1, 2) = 120 mH ± 15%, 4 ADC 
• Terminals 1 and 2 are solder lugs 
• Temperature rise: 22°C 
• RDC = 1.3 ohms 
• Open core and coil dimensions: 5”H x 5 1/4”W x 4”D 
• Mounting dimensions: 4 3/8”W x 3”D, 4 slots 
• Weight: 12 lbs approx.

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 0.5 mH, 55 A RMS, P/N 19010L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a 55 Amps Inductor, part number 19010L is shown below:

0.5 mH Gapped Inductor

Specifications:

• Gapped Inductor, P/N 19010L
• L (1, 2) = 0.5 mH ± 15 %, 55 A RMS 
• Frequency: 0 to 60 Hz 
• Ripple current at 2 KHz: 5.5 Amps p-p 
• Open core and coil, estimated dimension: 6.5”H x 7.5”W x 5.5”D 
• Bus bars are 1/4” x 1” with one hole 
• Calculated copper loss: 14.5 Watts 
• Calculated core loss: 13.4 Watts 
• Calculated temperature rise: 14º C 
• Weight: 40 lbs approx.

L/C Magnetics is a Gap Inductor manufacturer. For your specific requirements please call us toll free at (800) 595-7096 or send us an e-mail at info@lcmagnetics.com.

Gapped Inductor, 5 uH, 400 ADC, P/N 19006L

Product Overview:


L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated units or NEMA 1 enclosed units.

An example of a Gapped Inductor, part number 19006L is shown below:

Specifications:

• Gapped Inductor, P/N 19006L 
• L (1, 2) = 5 uH ± 25%, 400 ADC 
• Open core and coil, 6.5”H x 5.25”W x 5.5”D approximately 
• Copper bus bars are 1/4” x 1” with one hole 
• Calculated temperature rise: 23ºC 
• Copper winding construction 
• Weight: 17 lbs approximately

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 176 mH, 10 A RMS, P/N 18889L

Product Overview:


L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 enclosed units.

An example of a Custom Gapped Inductor, part number 18889L is shown below:

Specifications:

• Gapped Inductor, P/N 18889L 
• L (1, 2) = 176 mH ± 5%, 10 A RMS, 60 Hz 
• Applied voltage: 660 VAC max 
• Copper winding construction 
• Open core and coil: 6.5”H x 7.5”W x 6.5”D 
• Copper bus bar: 1/8” x 5/8” with one hole 
• Calculated temperature rise: 19ºC 
• Weight: 50 lbs approximately 
• 10% over-sized so that the unit does not go into saturation. 

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 44 mH, 40 A RMS, P/N 18887L

Product Overview:


L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.


The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 enclosed inductors.

An example of a Gapped Inductor, part number 18887L is shown below:

Specifications:

• Gapped Inductor, P/N 18887L 
• L (1, 2) = 44 mH ± 5%, 40 A RMS, 60 Hz
• Applied voltage: 660 VAC max 
• Copper winding construction 
• Open core and coil: 11”H x 9”W x 12”D 
• Copper bus bar: 1/8” x 5/8” with one hole 
• Calculated temperature rise: 21ºC 
• Weight: 150 lbs approximately 
• 10% oversized so that the unit does not go into saturation.

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped inductor, 5 mH, 7 ADC, P/N 18895L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is from up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Custom Gapped Inductor, part number 18895L is shown below:

Specifications:

• Gapped inductor, P/N 18895L 
• L (1, 2) = 5 mH ± 15%, 7 ADC 
• Ripple current at 20 KHz: 0.7 A p-p 
• Terminals 1 and 2 are J lugs 
• Calculated temperature rise: 26°C 
• Open core and coil dimensions: 3.25” H x 3.75” W x 3.25” D

L/C Magnetics is a  of Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

400 Hz Gapped Inductor, 200 uH, 130 Amps, P/N 19004L

Product Overview:

400 Hz Inductors are used in aerospace applications including ground support equipment.  L/C Magnetics can manufacture inductors for 400 Hz applications.  L/C Magnetics specialize in obsolete 400 Hz Inductors. We can build a replacement equivalent inductor after evaluation of your sample unit. 

The photo and the schematic of a 400 Hz gapped inductor, part number 19004L is shown below:

Specifications:

• Gapped Inductor, P/N 19004L
• L (1, 2) = 200 uH ± 15 %, 130 Amps 
• Frequency: 400 Hz 
• Calculated temperature rise above ambient: 36°C 
• Open core and coil, estimated dimension 7.5”H x 7.5”W x 7.5”D 
• Bus bars are 1/4” x 1” with one hole 
• Estimated weight: 40 lbs

L/C Magnetics is a manufacturer of 400 Hz Gapped Inductors. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 70 uH, 50 Amps, P/N 18891L

Product Overview:


L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 enclosed inductors.

An example of a Gapped Inductor, part number 18891L is shown below:

Specifications:

• Gapped Inductor, P/N 18891L 
• L (1, 2) = 70 uH ± 10 %, 50 Amps continuous 
• Peak current: 1500 Amps peak 
• Open core and coil: 6”H x 5 1/4”W x 5”D 
• Mounting dimensions: 4 3/8”W x 3”D, 4 slots 
• Copper bus bars: 1/8” x 5/8” with one hole 
• Isolation between winding and core will be 2 KV 
• Calculated temperature rise: 8 degrees C 
• The inductor is used to discharge 1500 volts developed across the capacitor

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 100 mH, 5 A RMS, P/N 18871L

Product Overview:


L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.


The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 18871L is shown below:

Specifications:

• Gapped Inductor, P/N 18871L 
• L (1, 2) = 100 mH ± 15%, 5 A RMS 
• Open core and coil 
• Copper winding construction 
• Dimensions: 5.5”H x 5.5”W x 5.5”D 
• Calculated temperature rise: 23°C

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 88 mH, 20 A RMS, P/N 18888L

Product Overview:

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 18888L is shown below:

Specifications:

• Gapped Inductor, P/N 18888L 
• L (1, 2) = 88 mH ± 5%, 20 A RMS, 60 Hz 
• Applied voltage: 660 VAC max 
• Copper winding construction 
• Open core and coil: 8”H x 7”W x 9”D 
• Copper bus bar: 1/8” x 5/8” with one hole 
• Calculated temperature rise: 16ºC 
• Weight: 75 lbs approximately 
• 10% over sized so that the unit does not go into saturation.

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Dual Gapped Inductor, 5 mH, 7 ADC, P/N 18896L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Applications inductor, Current Limiting Applications inductor and AC and DC Filter Applications inductor. All our Gapped Inductors are custom built to order. Please note that our inductors are not air gapped inductors. The gap is filled with a suitable insulation material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 18896L is shown below:

Specifications:

• Dual Gapped inductor, P/N 18896L 
• L (1, 2) = 5 mH ± 15%, 7 ADC 
• L (3, 4) = 5 mH ± 15%, 7 ADC 
• Ripple current at 20 KHz: 0.7 A p-p 
• Terminals 1, 2, 3 and 4 are J lugs 
• Calculated temperature rise: 26°C approximately 
• Open core and coil dimensions: 5.25” H x 5.25” W x 5.25” D approximately 
• Bifilar winding

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 1.4 mH, 15 A RMS, P/N 19000L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 19000L is shown below:

Specifications:

• Gapped inductor, P/N 19000L 
• L (1, 2) = 1.4 mH ± 15 %, 15 A RMS, 60 Hz 
• Open core and coil dimensions: 5.00”H x 3.75”W x 4.00”D approximately 
• Calculated temperature rise: 14ºC 
• Copper bus bars are 1/5” x 5/8” with one hole

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 1.1 mH, 10 ADC, P/N 19901L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 19001L is shown below:

Specifications:

• Gapped Inductor, P/N 19001L
• L (1, 2) = 1.1 mH ± 15 %, 10 ADC
• Open core and coil, 3”H x 3”W x 3”D
• Calculated temperature rise: 12°C
• Input/output connections are J-lugs

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 3000 Amps, P/N 18898L

Product Overview

L/C Magnetics has built this high current gapped inductor for a company in California. This power inductor is rated for 3000 amps continuous. Customers can choose different inductance values by changing taps. Four taps are provided.

L/C Magnetics builds Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The schematic and the photo of the high power gap inductor, part number 18898L are shown below:

Specifications:

• Multi Tap Gapped Inductor, P/N 18898L
• Inductance: 39 uH / 76 uH / 100 uH ± 25%, 1 PH, 60 Hz, 3000 A RMS
• Copper winding construction
• Indoor enclosure, 42”H x 32”W x 22”D
• All input/output connections are inside the enclosure.
• Estimated weight: 1000 lbs approx.
• Terminals 1, 2, 3 and 4 are available for 3000 Amp connections
• The front view and the rear view of P/N 18898L are shown above.

L/C Magnetics is a Gapped Inductor manufacturer. To discuss your specific application, please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Powder Iron Core Inductor, 74 uH, 40 A, 4 KHz, P/N 18899L

Product Overview

L/C Magnetics is a Powder Iron Core Inductor Manufacturer. We build Inrush Current Applications inductor, Current Limiting Applications inductor and AC and DC Filter Applications inductor. All our Inductors are custom built to order.

An example of a custom iron core inductor, part number 18899L is shown below:

Specifications:

• Powder Iron Core Inductor, P/N 18899L 
• L (1, 2) = 74 uH ± 15%, 40 A p-p 
• Frequency of operation: 4 KHz 
• Open core and coil: 3”H x 3”W x 3”D, approximately 
• U-frame provided for ease of mounting.
• Copper bus bars are 1/8” x 5/8”
• Calculated temperature rise is 22°C

L/C magnetics is an Iron Core Inductor manufacturer. To discuss your specific applications please call us toll free at (800) 595-7096, or send us an email at info@lcmagnetics.com.

Gapped Inductor, 0.22 uH, 30 ADC, P/N 18880L

Product Overview

L/C Magnetics is a Gapped Inductor Manufacturer. We build Inrush Current Application inductors, Current Limiting Application inductors and AC and DC Filter Application inductors. All our Gapped Inductors are custom built to order. These inductors are not air core inductors. These gapped inductors are filled with a suitable gapping material.

The Current range of the gapped inductors is up to 4000 Amps. Inductance values range from 10 uH to 2 H. We can offer gapped inductors as open core and coil units, encapsulated inductors or NEMA 1 inductors.

An example of a Gapped Inductor, part number 18880L is shown below:

Specifications:

• Gapped Inductor, P/N 18880L
• L (1, 2) = 0.22 H ± 15 %, 30 ADC
• Open core and coil dimensions: 3.75”H x 3.75”W x 3”D
• Calculated DC resistance: 0.0038 ohms
• Calculated temperature rise: 15º C
• Connections are 1/8” x 5/8” bus bars

L/C Magnetics is a Custom Gapped Inductor manufacturer. To discuss your specific application, please call us toll-free at (800) 595-7096 or send us an email at info@lcmagnetics.com.